What's New

Odyssey PC2150

BVA-300 Auto Meter Battery Tester

Quickly and accurately test 6 Volt and 12 Volt batteries with Auto Meter's patented pulsed load with CCA measurement technolog
Actually determines starter draw by comparing cranking voltage to loaded voltage
Quickly diagnoses alternator condition including output without the need for accessory loads
Stores the last 50 test results in memory for easy review and printing.
Includes an accurate DC and AC ripple voltmeter.
Menu driven and very easy to use
Compensates for battery temperature.

Applications:	6V & 12V Automotive, Marine, & Commercial Batteries. 12V & 24V Starting and Charging Systems.
Battery Sizes:	6V & 12V, 200-1600 CCA, 250-2000 CA, 250-2000 MCA, 175-1500 EN, 125-1050 IEC, 100-900 DIN.
Starter Draw:	0-999 Amps +/- 10%.
Alternator Diagnostics:	Regulation (Low, Good, or High), Diodes (Good or Bad), Output (Low, 20-50 Amps, Over 50 Amps).
Load:	Automated 40 Amp Resistive Load.
Display:	4X16 Character Wide Temperature LCD.
Housing:	Acid Resistant ABS Plastic w/Protective Boot.
Memory:	Last 50 Tests.
Load Clamps:	2.5 ft. 16 AWG Cables w/Insulated Volt and Amp Conductors and 4-Wire Kelvin Jaws for Accurate Measurements.
Voltage Range:	0 to 32 Volts, 0.01V Resolution, +/-0.05V, Test Batteries Down to 0.50 Volts.
Power Requirements:	9V Alkaline Battery.
Operating Temperature:	0 to 120 F.
Size:	4.5" x 7.1" x 1.4".
Weight:	1.5 lbs.
Warranty:	Auto Meter’s Friendly One Year Warranty.
Interface Options:	IR Printer, PC via RS-232.
Accessories:	AC-22 infrared printer controlled from up to 40 feet. AC-12 serial cable for computer download.