What's New

Odyssey PC2150

12 Volt
200 Minute Reserve Capacity
13"l x 6.8"w x 9.4"h

BusPro-600 Charging System

Worry Free High Volume

BusPro-600 Automated 12 Volt Battery Charging System will charge and maintain up to six batteries at a time. Connect up to three BusPro-600ís together and with optional lead sets charge and maintain up to 36 batteries. Each station operates independently. Lights indicate Defective Battery, Charging, Maintaining and Improper Connections. The BusPro prevents overcharging and removes sulfating by means of a micro controlled current pulse.

Micro controllers	Each of 6 stations are independently controlled
Over charging	Each controller prevents over charging
Sulfating	Each controller creates a current pulse to remove sulfating automatically
Charge Mode	5 Amps per station
Maintenance Mode	13.1 Volts with 0 to 2.5 Amp variation as needed
Temperature	0f to 120f F.
Humidity	0 to 85% non condensing
Red LED only	One per station indicates 'Charging' or 'Defective Battery' if flashing'
Greed LED only	One per station indicates 'Charged and Maintaining' ready for load test
Red & Green LEDs on	Indicates 'Topping of Battery'
Error	No lights indicate improper polarity or connection
Power	AC power
Clamp Leads	6 ft. 18 GA.
Expansion	Up to 3 BusPro units can be hooked together using the AC outlet on the left end
Capacity	Using the optional AC-8 lead sets you can charge 6 additional batteries
Size	3" x 8" x 36"
Shipping Weight	31 lbs.

GNB Systems

What's New

BusPro-600 Charging System

BusPro-600 Charging System