| BusPro-600s |
115
Volt Input |
| BusPro-620s |
220
Volt Input (without plug - attach required type) |
| Micro
controllers |
Each
of 6 stations are independently controlled |
| Over
charging |
Each
controller prevents over charging |
| Sulfating |
Each
controller removes sulfating automatically |
| Charge
Mode |
5
Amps per station |
| Maintenance
Mode |
13.1
Volts with 0 to 2.5 Amp variation as needed |
| Temperature |
0°
to 120° F. |
| Humidity |
0
to 85% non condensing |
| Red
LED only |
One
per station ' Steady' for Charging - 'Defective
Battery' if flashing' |
| Green
LED only |
One
per station indicates 'Charged and Maintaining'
ready for load test |
| Red
& Green LEDs on |
Indicates
'Topping of Battery' |
| Error |
No
lights indicate improper polarity or connection |
| Power |
AC
power |
| Clamp
Leads |
6
ft. 18 GA. |
| Expansion |
Up
to 3 BusPro units can be hooked together |
| Capacity |
Optional
AC-8 lead sets can charge 6 additional batteries.
This reduces the Amps per station to 2 1/2. This works well
for motorcycle batteries. |
| Size |
3"
x 8" x 36" |
| Shipping
Weight |
31
lbs. |
