What's New

Odyssey PC2150

Battery Chargers

12 VOLT - 10 AMP: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others.

GENERAL SPECIFICATIONS OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.0 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz
MECHANICAL SPECIFICATIONS DIMENSIONS: 3-1/2" wide x 2-1/4" tall x 4-1/2" deep 8.75cm x 5.63cm x 11.9cm WEIGHT: 3 lbs.; 1.36kg

FULL 3 LED DISPLAY:	Indicators display the battery's condition. The red light indicates that the charger has a 120-volt AC supply present. The yellow light indicates the proper connection to the battery and combined with the red light indicates the charger is charging. The green light indicates a full charge. Lights alternate when approaching full charge. This prevents overcharging as the battery reaches its full capacity.
PROTECTION:	The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise.
CHARGING CAPABILITIES:	The charger is capable of charging all commonly available Lead Acid batteries with rating from 20 to 100 amp/hour. All functions are fully automatic. The charger constantly monitors the battery condition. The charging sequence is determined by the condition of the battery and is fully interactive.
BATTERY RECOVERY: (deep discharge pick-up)	The charger is capable of fully and Even a totally discharged battery will recover to 5 Volt in 10 to 60 minutes, when the load is removed.
NO RISK OF SHOCK:	Our charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence our input connector has only two pins (we have an international standards approval on this model). Contact us